This one is going to be a quick one as there wasn't anything new discovered. In fact, I feel quite dumb. This is really a tale of "Do your research before acting and know what your goal is," as you'll end up saving yourself a lot of time. Nobody likes throwing away work they've done either, and there could be something here that is valuable for someone else.

---

I still can't escape PSRayTracing. No matter how hard I try to shelve that project, every once in a while I hear about something "new" and then wonder "can I shove this into the ray tracer and wring a few more seconds of speed out of it?" This time around it was Padé Approximants. The target is to provide me with faster (and better) trig approximations.

Short answer: "no". It did not help.

But... I found something that ended up making the ray tracer significantly faster!!

 

Quicker Trig

In any graphics application trigonometric functions are frequently used. But that can be a little expensive in terms of computational time. While it's nice to be accurate, we usually care more about fast if anything. So if we can find an approximation that's "good enough" and is speedier than the real thing, it's generally okay to use it instead.

When it comes to texturing objects in PSRayTracing (which is based off of the Ray Tracing in One Weekend books, circa the 2020 edition), the std::asin() function is used. When profiling some of the scenes, I noticed that a significant amount of calls were made to that function, so I thought it was worth trying to find an approximation.

In the end I ended up writing my own Taylor series based approximation. It is faster but also has a flaw, whenever the input x was less than -0.8 or greater than 0.8 it would deviate heavily. So to look correct, it had to fall back to std::asin() past these bounds.

 

The C++ is as follows:

double _asin_approx_private(const double x)
{
    // This uses a Taylor series approximation.
    // See: http://mathforum.org/library/drmath/view/54137.html
    //
    // In the case where x=[-1, -0.8) or (0.8, 1.0] there is unfortunately a lot of
    // error compared to actual arcsin, so for this case we actually use the real function
    if ((x < -0.8) || (x > 0.8))
    {
        return std::asin(x);
    }

    // The taylor series approximation
    constexpr double a = 0.5;
    constexpr double b = a * 0.75;
    constexpr double c = b * (5.0 / 6.0);
    constexpr double d = c * (7.0 / 8.0);

    const double aa = (x * x * x) / 3.0;
    const double bb = (x * x * x * x * x) / 5.0;
    const double cc = (x * x * x * x * x * x * x) / 7.0;
    const double dd = (x * x * x * x * x * x * x * x * x) / 9.0;

    return x + (a * aa) + (b * bb) + (c * cc) + (d * dd);
}

 

After a bit of trial and error, I found that a fourth-order Taylor series was the most performant on my hardware. It was measurably faster (by +5%), so I kept it and moved onto the next optimization.

 

Padé Approximants

I can't remember where I heard about this one.... I'm drawing a complete blank. If you want a more in depth read, check the Wikipedia article. But in a quick nutshell, they are a mathematical tool they can help provide an approximation of an existing function. To compute one, you do need to start out with a Taylor (or Maclaurin) series. While PSRayTracing is mainly a C++ project, Python is going to be used for simplicity's sake; we'll go back to our favorite compiled language when it matters though.

For the arcsine approximation above, using the four-term Taylor, we have this in Python:

def taylor_fourth_order(x: float) -> float:
    return x + (x**3)/6 + (3*x**5)/40 + (5*x**7)/112

 

Computing that into a Padé Approximant, we get what's known as a [3/4] Padé Approximant:

def asin_pade_3_4(x):
    a1 = -367.0 / 714.0
    b1 = -81.0 / 119.0
    b2 = 183.0 / 4760.0
    n = 1.0 + (a1 * x**2)
    d = 1.0 + (b1 * x**2) + (b2 * x**4)
    return x * (n / d)

 

I'm also going to provide the one from a 5th order Taylor Series as well, a [5/4] Padé Approximant:

def asin_pade_5_4(x):
    a1 = -1709.0 / 2196.0
    a2 =  69049.0 / 922320.0
    b1 = -2075.0 / 2196.0
    b2 =  1075.0 / 6832.0
    n = 1.0 + (a1 * x**2) + (a2 * x**4)
    d = 1.0 + (b1 * x**2) + (b2 * x**4)
    return x * (n / d)

 

Now when charting all three, we get this:

 

Wow, that already looks much better. Less error! It's a bit hard to see that, so let's zoom in on right side of the functions:

 

The error hasn't fully gone away, but it's much less than before. Instead of defaulting back to the built-in asin() method, there's a better trick up our sleeves: leveraging Inverse Trig Functions/Half Angle Transforms. Look at this:

This does seem a tad confusing, yet it lets us do a pro gamer move. When |x| is past a value we can "teleport" from the edge of the function more towards the center of arcsin(), perform the computation, and then go back and use the result there. In Python, this is our new asin(x) approximation:

def asin_pade_3_4_half_angle_correction(x: float) -> float:
    abs_x = abs(x)

    # If past the range, then we can use the half angle transformation to account for error
    if abs_x > 0.85:
        small_x = math.sqrt(0.5 * (1.0 - abs_x))
        r = (math.pi / 2) - (2.0 * asin_pade_3_4(small_x))
        return -r if x < 0 else r

    # Within the border we can just use the 3/4 approximation like normal
    return asin_pade_3_4(x)

 

Now with the correction in place, the edges look more like this:

 

It might be a little hard to see, but the dashed lines are the ones with this half angle transform correction method and they are hugging the y=0 line. There is a tiny bit of error if you zoom in.

There's even a further optimization that could be had: use (and adapt) a [1/2] Padé on the inside of the if body. This is because small_x will always be less than the square root of 0.075 (which is ~0.27). The [1/2] Padé approximant for asin() can compute much faster, but only for smaller values of x. It can even be inlined into our function for further optimization. See below:

def asin_pade_1_2(x):
    b1 = -1.0 / 6.0
    d = 1.0 + (b1 * x**2)
    return (x / d)

# ...

def asin_pade_3_4_half_angle_correction(x: float) -> float:
    abs_x = abs(x)

    # If past the range, then we can use the half angle transformation to account for error along with a "smaller" Pade
    if abs_x > 0.85:
        z = (1.0 - abs_x) / 2
        b1 = -1.0 / 6.0
        d = 1.0 + (b1 * z)
        small_pade = math.sqrt(z) / d
        r = (math.pi / 2) - (2.0 * small_pade)
        return -r if x < 0 else r

    # Within the border we can just use the 3/4 approximation like normal
    return asin_pade_3_4(x)

 

It still looks the same as the above chart, so I don't think it's necessary to include another one. Written as C++, we have this:

constexpr double HalfPi = 1.5707963267948966;

inline double asin_pade_3_4(const double x)
{
   constexpr double a1 = -367.0 / 714.0;
   constexpr double b1 = -81.0 / 119.0;
   constexpr double b2 = 183.0 / 4760.0;

   const double x2 = x * x;
   const double n = 1.0 + (a1 * x2);
   const double d = 1.0 + (b1 * x2) + (b2 * x2 * x2);

   return x * (n / d);
}

double asin_pade_3_4_half_angle_correction(const double x)
{
   const double abs_x = std::abs(x);

   if (abs_x <= 0.85)
   {
       return asin_pade_3_4(x);
   }
   else
   {
       // Edges of Pade curve
       const double z = 0.5 * (1.0 - abs_x);
       constexpr double b1 = -1.0 / 6.0;
       const double d = 1.0 + (b1 * z);
       const double pade_result = std::sqrt(z) / d;
       const double r = HalfPi - (2.0 * pade_result);
       return std::copysign(r, x);
   }
}

 

Compared to the original approximation method, this is more complicated, but it has benefits:

1. For a larger range [-0.85, 0.85] it will default to a simpler computation
2. For the edge cases it will use a quicker computation than std::asin()
3. There is less error

I'm very much a "put up or shut up" type of person. So let's actually plug it back into PSRayTracing and see if there is a speed improvement. We'll use the default scene (which is the final render from book 2):

 

Measuring

That globe is the user of asin(). All images generally look the same (minus a little fuzz). For the test case we will render a 1080p image, with 250 samples per pixel, and take up a few cores. The testing was done on an M4 Mac Mini (running a version of macOS Tahoe, using GCC15 compiled with -O3). Doing a few runs each, taking a median:

With std::asin() it took about 111 seconds to render the scene:

ben@Benjamins-Mac-mini build_gcc15 % ./PSRayTracing -j 4 -n 250 -s 1920x1080 -o render_std_asin.png
Scene: book2::final_scene
Render size: 1920x1080
Samples per pixel: 250
Max number of ray bounces: 50
Number of render threads: 4
  Copy per thread: on
Saving to: render_std_asin.png
Seed: `ASDF`
Rendering: [==================================================] 100% 111s
Render took 110.891 seconds

 

The older asin() approximation took roughly 105 seconds (~5% speedup):

ben@Benjamins-Mac-mini build_gcc15 % ./PSRayTracing -j 4 -n 250 -s 1920x1080 - o render_asin_taylor.png
...
Render took 104.674 seconds

 

And this new Padé Approximant approach took... The same amount of time:

ben@Benjamins-Mac-mini build_gcc_15 % ./PSRayTracing -j 4 -n 250 -s 1920x1080 -o render_asin_pade.png
...
Render took 104.87 seconds

 

This new asin() method is better (in terms of correctness), but not much of a contest when it comes to performance. It's a small victory.

 

An LLM Prompt

There's no denying the AI tooling of the past 3+ years is going to go away. At CppCon 2023 Andrei Alexandrescu gave an excellent talk entitled "Robots Are After Your Job: Exploring Generative AI for C++"; it's worth your time to listen. After all of the above work and that talk in mind, I decided to ask an LLM (Gemini in this case): "What's a fast approximation for asin(x) I can use in C++?". It gave me this:

constexpr double HalfPi = 3.1415926535897932385 / 2.0;

double fast_asin_cg(const double x)
{
    // Original Minimax coefficients
    constexpr double a0 =  1.5707288;
    constexpr double a1 = -0.2121144;
    constexpr double a2 =  0.0742610;
    constexpr double a3 = -0.0187293;

    // Strip sign
    const double abs_x = fabs(x);

    // Evaluate polynomial using Horner's method
    double p = a3 * abs_x + a2;
    p = p * abs_x + a1;
    p = p * abs_x + a0;

    // Apply sqrt term and pi/2 offset
    const double x_diff = sqrt(1.0 - abs_x);
    const double result = HalfPi - (x_diff * p);

    // Restore sign
    return copysign(result, x);
}

 

This looked too simple for me to believe. The source it cited was the documentation for asin in Nvidia's Cg Toolkit; a product that hasn't been updated since 2012. The reference implementation contained a rewritten form of the above. Porting it over to Python/Jupyter to verify it is trivial:

def asin_cg(x: float) -> float:
    '''
    Fast branchless asin(x) approximation.
    Based on Abramowitz and Stegun formula 4.4.45
    '''
    # https://developer.download.nvidia.com/cg/asin.html
    # https://personal.math.ubc.ca/~cbm/aands/page_81.htm

    # Original Minimax coefficients from Abramowitz and Stegun
    a0 =  1.5707288
    a1 = -0.2121144
    a2 =  0.0742610
    a3 = -0.0187293

    abs_x = abs(x)

    # Evaluate polynomial using Horner's method
    p = a3 * abs_x + a2
    p = p * abs_x + a1
    p = p * abs_x + a0

    result = (math.pi / 2) - math.sqrt(1.0 - abs_x) * p

    # Restore sign natively
    return math.copysign(result, x)

 

I was in disbelief that it was so clean and elegant. The implementation, error, and output. Look for yourself

 

That curve; it overlaps the arcsin() function without any visible difference. And the error is practically nothing. Though the real test would be in the ray tracer itself:

ben@Benjamins-Mac-mini build_gcc_15_new_asin_cg % ./PSRayTracing -j 4 -n 
...
Render took 101.462 seconds

 

Wow, This is considerably faster than any other methods. After verifying the render vs std::asin()'s output, it's indistinguishable. A better asin() implementation was found.

 

Measuring Further

This led me down a small rabbit hole of benchmarking this implementation on a few select chips and operating systems.

Intel i7-10750H, Ubuntu 24.04 ( w/ GCC 14 and clang 19):

./test_gcc_O3 "ASDF" "100" "10000000"
std::asin() time:  29197.9 ms
asin_cg() time:    19839.8 ms
Verification sums:
  std::asin():  -34549.5
  asin_cg():    -34551.1
  Difference:   1.60886
  Error:        -0.00465669 %
Speedup: 1.47169x faster

./test_clang_O3 "ASDF" "100" "10000000"
std::asin() time:  29520.7 ms
asin_cg() time:    19044.3 ms
...
Speedup: 1.55011x faster

 

Intel i7-10750H, Windows 11 (w/ MSVC 2022):

C:\Users\Benjamin\Projects\PSRayTracing\experiments\asin_cg_approx>test_msvc_O2.exe ASDF 100 10000000
std::asin() time:  12458.1 ms
asin_cg() time:     6562.1 ms
...
Speedup: 1.8985x faster

 

Apple M4, macOS Tahoe (w/ GCC 15 via Homebrew and clang 17):

./test_gcc_O3 "ASDF" "100" "10000000"
std::asin() time:  10469 ms
asin_cg() time:    10251 ms
...
Speedup: 1.02126x faster

./test_clang_O3 "ASDF" "100" "10000000"
std::asin() time:  12650 ms
asin_cg() time:    12073.2 ms
...
Speedup: 1.04777x faster

 

All of them have this CG asin() approximation well in the lead. On the Intel chip it's faster by a very significant margin. I'm curious to test this on an AMD based x86_64 system, but I'll leave that up to any readers. My guess is that it's just as good. The Apple M4 chip didn't have much as a boost, but it's still measurable (and reproducible). Anything greater than a 2% change is notable. I refer to Nicholas Ormrod's old talk on this matter.

 

Lessons

I think I originally went down the Taylor series based rabbit hole because I started trying that out with sin() and cos(), then naturally assumed I could apply it to other trig functions. I never thought to just first see if someone had solved my problem: a faster arcsine for computer graphics.

And here's the worst part: this all existed before LLMs were even available. I can't seem to recreate it, but there was a combination of the words "fast c++ asin approximation cg" that I queried into a search engine. The first result was a link to the Nvidia Cg Toolkit doc page. I only found this a few days ago.

I am surprised that no one else mentioned anything to me either. I even highlighted my faster asin() in the README as an achievement and no one bothered to correct me... I know this project (and these articles) have made the rounds in both C++ and computer graphics circles. People way more experienced and senior than me never said a thing.

This amazing snippet of code was languishing in the docs of dead software, which in turn the original formula was scrawled away in a math textbook from the 60s. It is annoying too when I tried to perform a search that no benchmarks were provided. Hopefully the word is out now.

I think my main problem is that I never bothered to slow down, double check what my goal was, and see if someone else already figured it out. That's what I gained from this experience.

And some fancy charts.